6532 Judge Adams Road
Whitsett, North Carolina 27377
Phone: 336-447-4546
Toll-free: 877-459-4737
Fax: 336-447-4708
[email protected]ISO 9001:2008 Certified
A LEAN Enterprise |
|
 |
 |
|
Tyco R-CAM 4 www.tycoelectronics.com
- Produces and tests ribbon cable assemblies.
- Terminate ribbon cable size 28 AWG with 1.27mm [.050 in.] centerline, with or without a manufactured slit and twist feature, or size 30 AWG with 0.64mm [.025 in.] centerline.
- Produce single-ended, double-ended, or daisy-chained cable assemblies up to 609mm [24 in.] long.
- One to ten cable assemblies can be processed with un-terminated cable tail up to 609mm [24 in.] long.
|
| |
 |
Tyco R-CAM 3 www.tycoelectronics.com
- Produces single- or double-ended cable assemblies on 28 AWG planar ribbon cable, using tube-loaded connectors.
- Cable assemblies may have one or two connectors and may be 44.2 to 2667mm [1.74 to 105 in.] long end-to-end, with a tail up to 1270 mm [50 in.] long.
- Cable assemblies will be electrically tested for short circuits, open circuits, and high-voltage failure as they are being made. An integral tester performs this function.
|
| |
 |
Stapla Raptor www.staplaultrasonics.com
- Automatic, heavy duty, ultrasonic wire splicing system
- Capable of producing perfect quality splices up to thirty-five square millimeters in cross section
- Fully automatic wire gathering mechanism for maximum productivity
- Automatic gauging of each splice before welding to confirm proper loading of all strands
- Automatic process monitoring of each splice ensures the welds fall within preset limits of weld power, time and height.
|
| |
 |
Tyco G Press www.tycoelectronics.com
- Most advanced design in the long-standing series of AMP-O-LECTRIC machines for terminating wire using reeled terminals and contacts.
- The CQM checks the crimp height of every terminal.
- Automatically adjust crimp height.
- Stops cycling when a bad crimp is detected by the CQM
|
| |
 |
Tyco CLS IV www.tycoelectronics.com
- Fully automatic lead maker
- Fully integrated crimp quality monitoring, assures quality product
- Continuously monitors and, when necessary, adjusts crimp height
- Stops when a bad crimp is detected and presents part to the operator for inspection
- High-speed cutting, stripping, and terminating
- Produces up to 4,800 leads per hour
- Fully integrated crimp quality monitoring, assures quality product provides real time feedback on crimp quality conditions
|
| |
 |
Artos CS-326 www.artosnet.com
- Fast economical electronic cut-and-strip machine
- Servo drive design for accurate, repeatable, high-speed processing
- Fully programmable microcontroller system monitors and controls all functions including: wire size, strip length, number of pieces, and other wire properties
- Wire size: minimum 30 AWG (0,05), maximum 1/2" (12.5mm) O.D. or 4 AWG (25mm2)
|
| |
 |
Kutrite MCS-135BC www.weixindustries.com
- High speed, large wire process machine
- Wire size: 18AWG - 1-1/8 in diameter
- Wire length: 4 inch to 500+ feet
- Maximum strip of 2 inch each side
- High power, brushless, closed loop servomotor feed system has 80+ lbs. of constant pull
- Feed speeds up to 750 feet per minute
|
| |
 |
Mechtrix MX-9100 www.mechtrix.com
- Heavy duty bench stripper
- Maximum diameter: 1.38in dia
- Precision adjustment of the blades to within 0.002"
|
| |
 |
Cirris Easy-wire CR www.cirris.com
- Software based program
- Tests for opens, shorts, mis-wires
- Tests resistors, diodes and capacitors
- Up to 32,000 points
|
| | |
SERVICES